Posted Bymick on March 10, 2002 at 23:50:25:
In Reply to: Re: Rear End posted byPaul Reid on March 09, 2002 at 19:46:44:
Easiest way is to mark the wheel and axle flange, then spin the wheel using the driveshaft. One complete revolution of the driveshaft and see how many times the wheel spins, and how far past the mark it is when finished. I.E.: one rev of driveshaft and wheel rotates 3 times plus 1/4 turn= 3.25 ratio
: : I would like to know what a poss traction gear ratio is. On ford trucks